FREE Shipping On Order Over 80$

Clemco BNP 65 Suction Blast Cabinet - Coventional Three Phase - BNP-65S-600 RPC
Clemco BNP 65 Suction Blast Cabinet - Coventional Three Phase - BNP-65S-600 RPC

Clemco BNP 65 Suction Blast Cabinet - Coventional Three Phase - BNP-65S-600 RPC

Regular price
Sale price
Shipping calculated at checkout.
Quantity must be 1 or more

BNP blast cabinets deliver efficient, affordable media blasting to clean, peen, deburr, or finish parts. The BNP 65 (enclosure size: 36 by 36 by 38 inches) is available in suction and pressure blast models, and accepts popular options – turntables and tracks for heavy parts, vertical doors to speed loading, and other Options Plus modifications. Shown with 600 CFM reclaimer (rear mounted) and dry filter dust collector. Also available with optional reverse-pulse dust collector.


  • Full-length, neoprene-on-fabric gloves resist wear and protect operator.
  • Ceiling-mounted, two-tube fluorescent light fixture with abrasive resistant Lexan® cover for extraordinary visibility.
  • Safety interlocks interrupt blasting if either door isopened. (Conforms to US regulations.)
  • Adjustable, heavy-duty chromed latches seal doors tight through years of service.


  • Unique Air Logic system (pilot actuated) to maximize air flow to the blast gun.
  • Double-wall, sound-insulated doors, with industrial quality lift-off hinges.
  • 14-gauge steel all-welded construction, with precisely formed bends, forms a rigid, long-lasting cabinet shell.


  • Tilt-out window, for tool-free glass changes in minutes.
  • Pressure regulator, gauge, and electric switch mounted within easy reach.
  • Built-in blow-off gun helps keep dust inside the cabinet, not on your floor.

Common Applications

  • Remove rust, mill scale, heat scale, and carbon buildup from metals
  • Strip paint, powder coating, plating, and anodizing from parts for rework
  • Eliminate burrs, parting lines, flashings, and other defects from castings and injection-molded parts
  • Extract residual sand from castings
  • Beautify steel, stainless steel, aluminum, brass and other metals with a uniform matte finish
  • Etch artwork and lettering into glass, stone, plastics, metal and other materials
  • Clean release agents and material buildup from molds

CDC-1 dust collectors come in three sizes; 300 cfm, 600 cfm, and 900 cfm. The cartridges are pulse-cleaned by pressing the manual pulse-valve to clear the filter of dust. Dimensions are 34" wide, 42" deep (with motor housing) and 94" high. MAH is 11 ft for the 300 cfm and 600 cfm units and 12-1/2 ft for the 900 cfm unit

The RPC-2 has two cartridges which provide 470 sq ft of filter area. The cartridges are automatically pulse-cleaned for maximum filter efficiency. Worn cartridges can be replaced in minutes. Dimensions: 56" wide (with motor housing) by 30" deep by 67.5" high. MAH for the RPC-2 series is 8 ft 10 inches.

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00

Shipping Address

Shipping Methods