Clemco 21056 2.0 Cu. Ft. 1" pipe Portable Blaster w/ TLR100 Remote Control System & FSV Slide Sand Valve

CLEMCO Model 1642 2.0 Cu. Ft. Portable Blaster With TLR100 Remote Control System & FSV Slide Sand Valve Only

Requirements for Operation: (These items are required but not all items included with this equipment)

• Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle. Refer to Air Consumption Chartin Blast Off 2 booklet (publication stock no. 09294).
• Minimum 100 cfm at 50 psi needed to close the pop-up valve and pressurize the blast machine.
• OSHA-required remote control system that interrupts blasting if operator should lose control of the nozzle when blast machine is pressurized. (Included)
• NIOSH-approved, type CE, supplied-air respirator.
• Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
• Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
• Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation:

The operator controls blasting from a remote control handle at the nozzle. (Not Included With This Unit) Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages

• One-man portable industrial-quality blast machines manufactured to ASME code.
• Industrial-quality valves, piping and fittings designed to maximize air flow and minimize energy required to operate the system.
• FSV abrasive metering sand valve maintains smooth, consistent, adjustable media flow

Features Include:

• Full Flow Stainless Steel Teflon-Sealed Ball Valves With Brass Body
• Semi-Elliptical Head For Larger Storage Of Abrasive
• Urethane-Coated Pop-Up Valve With External Sleeve For Long Wear Life & Fast Pressurization
• Large Inspection Door For Easy Access To Inside
• Heavy-Gauge Construction Pressure Vessel Fabricated For Rugged Field Service
• Built To ASME Standards
• Conical 35 Degree Bottom Ensures Total Use Of Abrasive & Uninterrupted Abrasive Flow
• 45 Degree Abrasive Flow Into Air Stream
• Heavy Duty Piping Assembled Tightly Against Tank Avoids Unnecessary Protrusions
• Flexible Pusher Line Guarantees Air Flow Without Pressure Loss
• Mounted On Two Heavy-Duty Rubber Wheels For Easy Portability

The FSV, an original Clemco design, is the triedand-true work horse of the industry. It is among the most imitated Clemco components. It is standard on machines from 2-cubic feet to 20-cubic feet capacity

Approvals and Certifications
Clemco's quality management system is ISO 9001-2008 certified.

Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 150-psi working pressure. Vessel is hydrostatically tested and National Board-certified.

Remote control system complies with OSHA regulation 1910.244 (b).